Raypak Digital R266A Pool Heater - 266k BTUs - Natural Gas - 009217 (2024)

Description

This Raypak PR266ADNC Digital Pool and Spa Heater is 266,000 BTUs, is fueled by natural gas, and has polymer headers and copper tubes. These digital heaters now feature ProTek Shield which is a cutting-edge module that protects the heat exchanger and extends the life of the heater. ProTek is excellent for use in chlorinated and salt water pools.

ProTek Shield is engineered to take the brunt of the corrosion that naturally occurs over time. When the ProTek Shield is eroding, that means it is working. Plus, this is a replaceable part and will save you money!

This model Raypak Digital heater has the highest quality integral copper fin tube heat exchanger available. Copper is well known for its ability to efficiently transfer heat and is the first choice for pool and spa heat exchanger construction. The Raypak digital gas heaters can be used in residential or small commercial pools and spas.

Standard with every digital pool and spa heater is a set of two inch slip fit CPVC water connections. These connections will make your installation secure and effortless. Raypak Digital pool and spa heaters also offer you flexible installation solutions.

The Raypak Digital heaters are equipped with an intelligent control system that can easily be tied into an existing remote system. It also features a thermostat controlled by a microprocessor for setting the perfect temperature for your pool or spa. The self-adjusting burner compensates for gas pressure fluctuations, ensuring that the heater will always burn clean and safe.

Energy-smart Raypak heaters consistently achieve the highest efficiency ratings and the Raypak Digital is no exception. It exceeds all federal and state standards. And every Raypak gas pool heater is plumbed and test fired before it is put in the carton. This ensures that your heater will fire right out of the box and continue to give you years of trouble-free operation.

The sleek and stylish Raypak Digital Gas Pool and Spa Heater features innovative technology designed to keep your pool or spa at the perfect temperature. Built to withstand various weather conditions, this modern pool heater is the perfect solution for environments requiring efficiency, convenience and versatility. Thanks to a brilliant low-profile design, corrosion resistant cabinet, copper fin tube heat exchanger, and a bevy of advanced engineered materials, enjoying your heater year round is a breeze.

Elevation on this model is to 2,000 feet. For higher elevation digital heaters, please contact our helpdesk for a quote.

Raypak Purchase and Installation Recommendations

Poolweb.com and Raypak want to ensure that everyone who purchases a Raypak pool heater receives a pool heater which will last and perform better than anything else on the market. We ask that you consider carefully the following before making your purchase decision:

A pool heater installation does require experience and training. Pool heater installations should be left to a qualified installer, service agency or the gas supplier. Even if a service company has the technical qualifications, be sure to ask if they have installed pool heaters in the past.

Not all pool professionals, electricians, plumbers, or gas technicians have the experience or qualifications necessary to install a pool heater. Please check your local codes or contact your local governing agencies to determine what licenses are required and if any permits are required BEFORE you purchase.

There are various other considerations that can affect the life and operation of the heater, such as the type of sanitization systems present in your pool. We highly recommend installing a pool chemistry control system in conjunction with your heater. Consistently properly balanced pool water will greatly extend the life of your heater.

Not every pool heater can be installed in every state. There are special considerations that need to be made in particular regions of the country or in specific states. If you are unsure of what type, model or accessories to purchase to ensure a safe and complaint heater, please contact us for assistance.

What is Raypak's warranty?

Raypak pool and spa heaters are engineered to perform and built to last. The brand you know and trust is bringing you more peace of mind with a limited warranty on residential pool and spa heating products.

The benefits of their new extended limited warranty, include 2-year extended warranty, professional in person service, 24-hour or same-day service, genuine Raypak parts, and factory technical support. Additional information on the terms and conditions and how their warranty impacts you, this item and the installation process, please visit the Raypak website.

Raypak Digital R266A Pool Heater - 266k BTUs - Natural Gas - 009217 (2024)

FAQs

How long does it take to heat a pool with a natural gas heater? ›

An average sized pool (rectangular 16×36) will take 6 hours to heat 10 degrees with a standard heater (300k BTU). The volume of water to heat, how many degrees it needs to increase and the size of your heater all play major factors in the time needed to heat your pool.

How much gas does a pool heater use a day? ›

Here's why: the average propane pool heater burns about 1 gallon of propane per hour per 100,000 Btus. Since a propane pool heater for a standard-sized pool (~21,000 gallons) outputs 400,000 Btus, you will burn about four gallons of propane per hour.

Why won't my Raypak pool heater fire up? ›

Check the Power: If your Raypak pool heater isn't working at all, the problem could be something as simple as a lack of power. Go make sure there aren't any tripped circuit breakers in the fuse box, then check that the unit's time clock is set to the “On” position.

How long do natural gas pool heaters last? ›

A propane or natural gas pool heater typically lasts between 7 to 12 years. But electric heaters last between 15-20 years, and solar heaters have a lifespan of about 20-30 years.

How many hours a day should I run my pool heater? ›

A bigger pool heater may only require two hours to have a pool nice and warm and a smaller heater made need three hours to get that same size swimming pool to a comfortable swim temperature. The type of swimming pool heater a homeowner has will also be a factor in when to run a pool heater.

Should I leave my gas pool heater on all the time? ›

Also, turn the temperature down or turn off the heater whenever the pool won't be used for several days. This will save energy and money. It's a myth that it takes more energy to heat a pool back up to a desired temperature than you save by lowering the temperature or turning off the heater.

Is it OK to run pool heater all night? ›

You Should Never Leave a Conventional Pool Heater on Overnight. Although electricity and gas costs can vary wildly depending on where you live and how much energy usage is typical for your area, heating pools with conventional heaters can be costly if time is not taken into consideration.

How efficient are natural gas pool heaters? ›

Therefore, it wastes 20% of the fuel. Most gas pool heaters feature their efficiency percentage on their nameplates. A pool heater's manufacturer can also provide its efficiency percentage. Today, you'll find some gas pool heaters with 89%–95% efficiency.

How do you calculate gas usage for a pool heater? ›

  1. Let's do it with American units for fun. To raise one gallon by one Fahrenheit, one needs 8.33 BTU. Natural gas has a « lower calorific value » (the one you can use) of 930 BTU per cubic foot. ...
  2. Now count the gallons in your pool and decide on X degrees.
  3. Gallons * X * 8.33 / 744 = cu. ft. of natural gas.
Sep 13, 2019

What is the life expectancy of a Raypak pool heater? ›

The average life of a pool heater is between 15 and 25 years with regular usage and proper maintenance, but there are various factors that impact that projection.

What is the warranty on a Raypak pool heater? ›

The brand you know and trust is bringing you more peace of mind with a 2-year extended warranty on residential pool and spa heating products. MasterTek, Raypak's online warranty claim system will streamline and improve efficiency for warranty claims.

How do you know if your pool heater is bad? ›

If you notice that your pool water is not reaching the desired warmth or if it fluctuates unexpectedly, it's a clear indication that your heater is struggling. Inconsistent heating may be caused by issues with the thermostat, faulty sensors, or other internal components that need professional inspection and repair.

What ruins a pool heater? ›

Chemistry is not only important for the safety of the pool heater but, the rest of the equipment, the pool surface, and obviously for swimmers as well. It doesn't take long for improper water chemistry to begin affecting said equipment. Thus, the MAIN reasoning for the quick failure of pool heaters.

How long does it take to heat up a pool with a gas heater? ›

The Gas pool heater can take anywhere between 4 to 24 hours dpending on some of the above factors to heat up. Gas heaters can easily heat your pool anywhere between 12 and 15 degrees in 24 hours, however generally you would not require your pool to be heated that high.

Are gas pool heaters expensive to run? ›

The average cost to heat a pool for one hour on natural gas is around $ 7.00. To heat, an average pool (10-12K Gallon) with no solar cover typically takes 8-14 hours.

Can you heat a pool with gas heater? ›

Gas-fired pool heaters remain the most popular system for heating pools. Today you can find new gas-fired heater models with much higher efficiencies than older models. However, depending on your climate and pool use, they may not be the most cost-effective option when compared to heat pump and solar pool heaters.

What heats a pool faster gas or electric? ›

Gas heaters also have an advantage because they can heat the pool faster than other types after being turned off. They are the best at raising the temperature quickly, making them ideal for weekend use, when guests arrive, or with second homes.

How many gallons of gas does it take to heat a pool? ›

For a typical size 400,000 BTU heater, that equals 4 gallons an hour. Currently, propane costs between $4.50 to $5 per gallon. Since prices do fluctuate be sure to check with your provider. Typically, one hour on propane will cost $ 18.00.

Should I run my gas pool heater at night? ›

Unless you're preparing for a social event or are in charge of a 24/7 commercial establishment, we do not recommend keeping your pool heaters running overnight. Doing so will cost you a small fortune.

References

Top Articles
Latest Posts
Article information

Author: Edmund Hettinger DC

Last Updated:

Views: 6451

Rating: 4.8 / 5 (58 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Edmund Hettinger DC

Birthday: 1994-08-17

Address: 2033 Gerhold Pine, Port Jocelyn, VA 12101-5654

Phone: +8524399971620

Job: Central Manufacturing Supervisor

Hobby: Jogging, Metalworking, Tai chi, Shopping, Puzzles, Rock climbing, Crocheting

Introduction: My name is Edmund Hettinger DC, I am a adventurous, colorful, gifted, determined, precious, open, colorful person who loves writing and wants to share my knowledge and understanding with you.